BLM-SA1002 Two-side semiautomatic bottle labelling machine

Description

Semiautomatic bottle labelling machine for applying Two Self-Adhesive labels – Model BLM-SA1002

Labeling machine in Stainless Steel with 2 stations, electronic operation, with motorized introduction and ejection of the bottles. Output time of label description of the customer, knurled roller self-compensating.
The machine is equipped with a retractable handle and roll paper recovery. Allows you to deploy up to 3 labels.

Hourly production 500/700 bottles.
Models 1 and 2 heads can be equipped with the following options:
– Device for conical containers
– Device for label search
– Device for mark on capsule
– Device for sensing Notch on glass
– Automatic Bottle ejection to increase production to 800-1.000 bph
– Batch/Date label thermal transfer device.

CHARACTERISTICS:

Power supply: 220V 50Hz Single Phase
Installed power: 0.5 Kw
Production bott. / Hour: 500-700
Weight Net: 40 Kg
Weight Packed : 57 kg
Standard width: 680 cm – height: 670 cm – depth: 470 cm
Sound level: 50 dB

Round bottles sizes:
– Minimum diameter: 60 mm
– Maximum diameter: 120 mm
Label size:
– Maximum label length without back label: 340 mm
– Maximum label length with back label: 340 mm
– Maximum height of the paper support: 170 mm
– Minimum label height: 15 mm
– Minimum spacing between labels: 3 mm
– Maximum spacing between labels: 6 mm (but up to 10/15mm possible)

Optional accessories :

LABEL PRINTER KIT

Printing station with heat transfer system operation. Thermal transfer Printer complete with stainless steel holder for adjusting the height and lateral position perpendicular to the label.

Max Printing Area : 27 mm x 13 mm
Print Size : 1 line Standard, up to 3 lines, 12 characters per line
Print Orientation : horizontal, vertical on request
Size : H 3mm standard, width 2mm, other dimensions available on request
Location of that printing : min 10mm – max 135mm from the bottom of the bottle

The thermal transfer printer is equipped as standard with:
– Printer group
– Control panel
– Double line clichè holding characters
– 1 rolll of tape 35 mm wide (marking capacity of 15.000 marks with 1 line, 10.000 with 2 and 7.000 with 3)
– 1 character set standard

TECHNICAL DATA
Printing surface : max 27x13mm
Installation Type : electro-pneumatic
Max reel diameter : 80mm
Maximum tape width : 45mm
Analog setting temperature : 70°C to 200°C
Type management : control board microprocessor
Maximum speed : 40 strokes per minute
End of roll warning : NO
Size alone printer : 190x140x120mm deep
Printer weight : 3 Kg
Dimensions of the control panel : 150x110x80mm
Power supply : 230V-50Hz
Air pressure : 3 bar
Print command : NO contact

• PRICE … 2450 Eur